Tips For Replacing a Window Handle
Changing the handle on your window is a simple task that can be accomplished in the comfort of your own home. Follow these tips for smooth operation and a stunning looking finish.
Remove the screws from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you are getting the right size replacement.
1. Take a measurement of the length of the Spindle.
It's important that you ensure the correct size of the spindle when replacing the window handle. This is because it will affect how tight or loose the handle is and whether it will lock correctly inside the frame of the window. The spindle is a metallic shaft that connects the handle to the lock on the window frame. The spindle is either a standard industry 8mm cross-section or older 9mm versions. The modern industry standard is 8mm, but this was not always the case, so when buying a new handle it is important to check the dimensions.
The most efficient method to determine the length of the spindle is to take off the handle you have already installed, this can be done by turning it into an open position, then unscrewing the two screws (which could be hidden behind plastic caps that will have to be removed) that hold the handle. Once removed take a measurement from the base of the handle until the end of the spindle. This will provide you with the measurements needed to purchase a replacement.
There are many options to consider when choosing a new window handle from sleek chrome that blends into a contemporary home to traditional brass that looks stunning in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail locks! There are many options, but the most important is to pick the style that is appropriate to your home's style.
Espag handles are typically installed to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles from Cadenza are a different size since they have an angled blade that operates a multi-point locking mechanism inside the window.
Another factor when choosing the best window handle is determining what hand you will need, this is simply defined by the hand you use to open the door. Inline Espag window handles aren't handed and can be used on either left or right handed windows. Cranked window handles can only be used for windows that open in a single direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. But the good news is that replacing the uPVC window handle is a very easy task you can complete yourself. You will require only a few basic hand tools as well as some time to complete the task.
First of all, you must open the window and ensure that it's in an unlocked position. Then, you need to remove the screws that hold the handle in place. Once the screw caps are removed you will be able remove the handle.
The handle is connected to a spindle in the window frame. Depending on the type it is held in place either by a screw or pin. The most common handle types are inline Espagnolette handles and cockspur handles. Both types of handles are found on casement windows, as well as aluminum ones. They can be locked using keys to prevent the opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle you will require a flat-bladed screwdriver. Once this is released, the handle will slide off the spindle. Once the old handle is removed, you'll be required to measure the length of the spindle in order to ensure that your new handle is compatible with this size.
Once you have the proper size, you can now fix the new handle into place. It is essential to ensure that the handle is securely fastened and rotates in the proper direction (clockwise if the handle is open, or counterclockwise if the handle closes). It is also crucial to ensure that it is not installed upside down.
In the end, you must replace the screw cover caps. After you've done that then you can test the handle to ensure that it works correctly. Also, you should test the locking mechanism by moving the handle to the locked position and then returning it to the locked position.
3. Take off the Screws
A uPVC handle is an essential part of any house and is the first thing to show signs of wear or damage. This can be caused by natural elements or by regular use and sometimes even malicious damage caused by opportunistic criminals who may want to open a closed window and gain access to your home. But, a simple fix is a simple solution and prevent the issue from occurring again.
uPVC handles could also be difficult to remove if the locking mechanisms aren't working correctly. In most cases, the issue is solved by replacing the multipoint lock, rather than the entire handle and it's worthwhile to check this out since it can save you money.
After you've removed the old handle, you'll need to remove the screws that were holding it in place. These screws are usually found on the inside of the handle's base. You may require a screwdriver for this and it's crucial to not over tighten as this can cause the handle to loosen.
You will then need to locate the fixing screws or pins that hold the new handle in place. They will likely be located on the inside face of the base of the handle and you will need to use either a screwdriver or pair of pliers to take them off them. If you want to, you can replace the screw caps and check the handle to ensure it functions correctly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then screw it into. If you want to replace the screw covers, make sure the handle is in a position that is open and any screws are securely fixed. After this is done, you're all done and you are able to enjoy your new window handle. This will hopefully help you avoid expensive window and door replacements in the future. If you'd like more assistance with this or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Fit the New Handle
The replacement of a damaged window handle or updating it is easy and can be completed within just a few steps. door handle repair repairmywindowsanddoors is to determine the type of handle, take measurements of its spindle and identify the tools you'll require to complete the task. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and ensure that you have an appropriate handle for use.
The first step is to locate the screws that hold your current window handle in place and remove these, whilst keeping a safe hold on the handle to prevent it from crashing and result in injury. Once the screws have been removed and repositioned, they can be put in a secure location to be replaced in the future.
After the handle that was used previously was removed, you can begin fitting your new handle. The handle must be a perfect fit in order to function correctly and keep the window in its closed position. The next step is to slide the metal square at the back of the handle into the hole in the window mechanism, making sure it is secure.
Once the new handle is installed, the final thing to do is replace the screw caps and check to see if it functions. If you're not satisfied with the result or if the window does not open and close as it should the next step is to contact our experts who will be able to assist.
Most UK homes are equipped with uPVC Windows. This means that a lot of them will require replacement at some point due to damage or wear. The procedure is simple and can be done by anyone with a little knowledge of DIY. It is important that the handle you use is in line with the style and size of your window. Contact us if are unsure of the type of handle you require. They'll be able guide you through the options.